This display case has been designed to fit a 1:18 scale model car, but please check your sizes very carefully, it will not necessarily fit all models. Some of the later F1 cars are now bigger than previous designs.
The plinth of this display case has a wooden trim around the outside and is made in the colour of your choosing. The outer trim on this display plinth is 5mm higher than the inside display surface, which will stop the removable clear cover from sliding off the plinth. The top of the display base is covered in a quality baize in the colour of your choice, and the bottom of the plinth is also covered in a soft baize, which will stop the display case from damaging your furniture.
The display cover is made from 3mm thick UV blocking acrylic, which will not only protect from over 90% of UV light, it will also protect your model car from dust and inquisitive fingers. The display cover is easily removable and can be lifted from the base to gain access to your model car.
- Choice of wooden trim and centre colours
- Blocks over 90% UV Light, so protecting the bodywork on your model car from fading for longer
- Keeps your model free from dust, but more importantly will stop cleaning products being used on it
- Deters people from touching your model and damaging the wipers or mirrors.
- Easily removable display cover
This display case has internal sizes of 325mm wide x 150mm deep x 130mm high and external sizes of 359mm wide x 184mm deep x 140mm high.