Please measure your action figure carefully to make sure it fits. The internal height above the shelf is about 400mm. We have designed it to fit most action figures but obviously their sizes varies wildly from one character to the next, and even between manufacturers.
The back panel is fixed to the wall using our stainless steel supports, which when fitted leave no sign of the screw head.
The front cover is easily removable and hooks into the slots on the back panel, which makes it very easy to remove when you want to remove it, but still secure enough not to be knocked off. To remove the front cover you just push it up and then lift it away. There is a support underneath the shelf which sits on top of the bottom of the cover, this means that as you fit or remove the cover, the shelf will lift and fall slightly.
The display cover is made from 3mm thick UV blocking acrylic, which will not only protect from over 90% of UV light, it will also protect from dust and inquisitive fingers. The display cover can easily be removed from the back panel to access your action figure.
- Choice of back panel colours
- Blocks over 90% UV Light, to protect your figurine from fading
- Keeps your action figure free from dust, but more importantly will stop cleaning products being used on it
- Deters people from touching your action figure
- Quality Stainless steel wall fixings
- Easily removable display cover
This 1:6 scale action figure wall display case has a choice of back panel colours, just choose the colour you would like from the menu above. It has a clear acrylic bracket/shelf which will hold your displayed action figure in place.
The shelf brackets protrude into the shelf by 11mm on the top of the shelf
This wall display case measures approximately 200mm wide x 195mm deep x 400mm high internally.
This display case measures approx 218mm wide x 431mm high and 205mm depth externally.