This display case has been designed to fit a 1:72 scale model plane, but please check your sizes very carefully, it will not fit all 1:72 scale models, as planes vary a lot in size. Most likely the best option is to get one made to your exact size here.
The bottom section of acrylic is slightly larger than the outside size of the display case cover so the display cover sits on top of it, whereas the top part of the base is slightly smaller than the inside size of the display case, so it sits inside the display cover and stops the display cover from being knocked off.
The two pieces of the base are held together (and apart by about 13mm) by machined stainless steel supports in each corner.
- Choice of base colours
- Stainless Steel Corner Posts for a modern look
- Blocks over 90% UV Light, so the paintwork on your model will be protected for longer
- Keeps your model plane free from dust
- Deters people from touching your model plane
- Easily removable display cover
The external dimensions of this display case are 357mm wide x 257mm deep x 235mm high, and the internal measurements are 350mm wide x 250mm deep x 205mm high.