This display case has been designed to display a half scale model F1 helmet, it will NOT fit a full size helmet. Please check your sizes to make sure. We have a display case for a full size F1 helmet here.
The plinth of this display case has a wooden trim around the outside and is made in the colour of your choosing. The outer trim on this display plinth is 5mm higher than the inside display surface, which will stop the removable clear cover from sliding off the plinth. The top of the display base is covered in a quality baize in the colour of your choice, and the bottom of the plinth is also covered in a soft baize, which will stop the display case from damaging your furniture.
The display cover is made from 3mm thick UV blocking acrylic, which will not only protect from over 90% of UV light, it will also protect from dust and inquisitive fingers. The display cover is easily removable and can be lifted from the base to gain access to your displayed model.
- Choice of wooden trim and centre colours
- Blocks over 90% UV Light
- Keeps your crash helmet free from dust, but more importantly will stop cleaning products being used on it
- Deters people from touching your F1 helmet
- Easily removable display cover
The external dimensions of this half scale crash helmet display case are 234mm wide x 184mm x deep 180mm high, and the internal measurements are 200mm wide x 150mm deep x 170mm high.
